High-quality metrology for quality control in the measuring room, production, incoming goods and development.
Zahnradpumpen & Misch- und Dosiermaschinen mit höchster Genauigkeit für die Verarbeitung von Flüssigkeiten und Pasten.
Hochgenaue Kugelführungen für spielfreie Hub- und Drehbewegungen beim Einsatz im Maschinen- und Vorrichtungsbau.
Einsatzbereiche von Mahr Maschinen
Proven use for decades to spin finest yarn: planetary spinning pumps are the heart of every synthetic fibre spinning plant.
Spin finish dosing pumps do not only meter preparation fluids. They can also be used for the consistent dosing of water, perfume or even oils.
There are almost no limits to the use as a dosing pump in various industries. As a spinning pump it is only used for special applications.
Predominantly used in spinning and adhesives technology, they offer the possibility of realizing two flow rates with minimal space and one motor drive only.
Product bores which are on both sides of the pump body allow the pump to be integrated directly into the production line.
They can be used for all applications. Direct installation in the product line does not require an additional clamping block.
Discharge pumps ensure gentle discharge of polymer melts with low product shear. Booster pumps ensure a defined process pressure for downstream tools such as dies or extruders.
For highly accurate, low-pulsation dosing of liquids. The gear metering pumps achieve an efficient performance even at low viscosity and back pressure.
Paint metering pumps can also be used for robot applications. Even at short flushing cycles these pumps show excellent flushing results.
Solutions for material preparation, conditioning and supply to the meter mix dispense machine.
The mixing takes place exclusively through the flow movement of the components and the geometry of the mixing element.
The components are mixed by a rotating element in a mixing chamber.
The mixing takes place through the flow movement of the components in cooperation with the geometry and rotation of the mixing element.
MarMax MM2P2 Part Meter Mix System
MarMax (?) MM2P2 Part Meter Mix System
Mahr Metering Systems' two part meter mix system is a closed loop continuous 2-stream mixing machine.
The unit is designed to continuously mix two liquids of varying characteristics, viscosities and densities.
- easy to maintain
- designed for a 24/7 operation
- continuously mixing (???)
- shot or continuous dispensing (???)
- controls can meet UL requirements as an option
High metering accuracy and consistency improves end product quality and saves money by using less product and reducing scrap. The MM2P is specially designed for direct use on full production systems.
All products are metered and continuously flow-monitored in the recirculation mode to be ready for shot or continuous dispensing on demand. The switching of the recirculation valves from recirculation to dispensing allows for the immediate delivery to the downstream process.
Rugged, modular construction:
MM2P systems can be sized for pilot plants' low rates or higher full production rates. Ratios can be 1:1 to as much as 100:1 depending on overall rates. Flow rate accuracy for each stream can be better than 1% from setpoint and overall ratio accuracy can also be better than 1% deviation between the streams
| Emission range | 0.1 - 3.0 litres/min |
|---|---|
| Mixing ratio | Infinitely variable |
| Material tank sizes | 3 to 10 litres |
| Conveying element | Gear metering pump with stuffing box |
| Remote servicing | Remote service capability integrated |
| Tank filling | Manual |
| Operation via colour touch screen panel | Screen size 15" |
| Day Tank volume | 20-100 Liter |
| Pump range | 0.02-100 cc/rev |
| Gearmotor | 0.75W, 1800rpm, 20:1 |
| Total throughput (2 component) | 10 L/min max. |
| Operating voltage | 230/460 VAC, 50-60Hz |
| Air Pressure | 6 bar |
| Weight | 300 kg |
- Mass flow meters (Coriolis)
- Level sensor for day tanks
- Dual port mix head
- Remote access and wireless control
- Degassing Pressurized tanks
- Agitated tanks
- Auto refill of day tanks
- Heat Zones
- Special Voltages
- Rockwell or Siemens PLC control
- Menu driven operator interface
- Historical recording available
- Automatic or manual mode performance available
- Display of individual component or total blend throughput
- Historical event log with time stamp
- Safety shut down for high-pressure and ratio or flow deviation
Inquiry specification
Please fill out this form.
With your data we will select the suitable machine.
The machine program cannot be listed completely due to the large number of designs, the same applies to the areas of application. We are pleased to advise you!
Suitable for these applications:
Mixing Heads – the mixture makes the difference
A perfectly customized mixing head guarantees the best mixing quality and exact discharge capacity. In order to select the suitable mixing head, we analyse the production process considering the operating parameters, such as material characteristics, the emission and the mixing ratio.
Do you have questions about our products?
Please contact us at +49 (0) 2922-87840-0
