High-quality metrology for quality control in the measuring room, production, incoming goods and development.
Zahnradpumpen & Misch- und Dosiermaschinen mit höchster Genauigkeit für die Verarbeitung von Flüssigkeiten und Pasten.
Hochgenaue Kugelführungen für spielfreie Hub- und Drehbewegungen beim Einsatz im Maschinen- und Vorrichtungsbau.
Einsatzbereiche von Mahr Maschinen
Proven use for decades to spin finest yarn: planetary spinning pumps are the heart of every synthetic fibre spinning plant.
Spin finish dosing pumps do not only meter preparation fluids. They can also be used for the consistent dosing of water, perfume or even oils.
There are almost no limits to the use as a dosing pump in various industries. As a spinning pump it is only used for special applications.
Predominantly used in spinning and adhesives technology, they offer the possibility of realizing two flow rates with minimal space and one motor drive only.
Product bores which are on both sides of the pump body allow the pump to be integrated directly into the production line.
They can be used for all applications. Direct installation in the product line does not require an additional clamping block.
Discharge pumps ensure gentle discharge of polymer melts with low product shear. Booster pumps ensure a defined process pressure for downstream tools such as dies or extruders.
For highly accurate, low-pulsation dosing of liquids. The gear metering pumps achieve an efficient performance even at low viscosity and back pressure.
Paint metering pumps can also be used for robot applications. Even at short flushing cycles these pumps show excellent flushing results.
Solutions for material preparation, conditioning and supply to the meter mix dispense machine.
The mixing takes place exclusively through the flow movement of the components and the geometry of the mixing element.
The components are mixed by a rotating element in a mixing chamber.
The mixing takes place through the flow movement of the components in cooperation with the geometry and rotation of the mixing element.
Dynamic Mixing Heads
The components are mixed by a rotating element in a mixing chamber. Output and mixing quality depend heavily on viscosity of components when using static mixer.
MarMax GP 28
- 4 material ports for casting and 2 flushing ports
- pneumatically controlled material valves
- long recirculation available
- electric motor drive
- automatic flushing valves
- output: 1 up to 20 ltr/min
- material: aluminium or stainless steel
MarMax GP 40
- 2 material ports for casting and 2 flushing ports
- pneumatically controlled material valves
- long recirculation available
- electric motor drive
- automatic flushing valves
- output: 1 up to 25 ltr/min
- material: aluminium or stainless steel
MarMax GP 50
- 4 material ports for casting or spraying and 1 flushing port
- pneumatically controlled material valves
- long recirculation available
- air motor or electric motor drive
- manual and automatic flushing valve
- output: 0.5 up to 8 ltr/min
- material: aluminium or stainless steel
MarMax GSP 20 | manual
- 2 material ports for casting and 2 air purge/solvent flushing ports
- spray conversion kit
- air motor or electric motor drive
- hand operated lever
- manual flushing valves
- output: 0.5 up to 10 ltr/min
- material: aluminium or stainless steel
MarMax GSP 20 | automatic
- 2 material ports for casting and 2 air purge/solvent flushing ports
- spray conversion kit
- pneumatically controlled material valves
- air motor or electric motor drive
- handle with electric push button
- manual or automatic flushing valves
- output: 0.5 up to 10 ltr/min
- material: aluminium or stainless steel
MarMax GP 24
- 3 components for casting or spraying and 1air purge/solvent flushing port
- max. 20 bar mixing chamber pressure
- pneumatically controlled material valves
- long recirculation available
- air motor, electric motor or hydraulic motor drive
- handle with electric push button
- manual and automatic flushing valve
- output: 0.5 up to 10 ltr/min
- material: aluminium or stainless steel
Sea Max GSP 25
- 2 material ports for casting or spraying and 1 flushing port
- spray conversion kit
- pneumatically controlled material valves
- long recirculation available
- air motor or electric motor drive
- handle with electric push button
- manual or automatic flushing valve
- output: 0.5 up to 10 ltr/min
- material: aluminium or stainless steel
