High-quality metrology for quality control in the measuring room, production, incoming goods and development.
Gear Metering Pumps & Meter Mix Dispense Machines with highest accuracy for processing liquids and pastes.
High-precision rotary stroke bearings for backlash-free linear and rotational movements for use in machine and device construction.
Pioneering machine solutions for the construction industry with high efficiency and advanced technology
Proven use for decades to spin finest yarn: planetary spinning pumps are the heart of every synthetic fibre spinning plant.
Spin finish dosing pumps do not only meter preparation fluids. They can also be used for the consistent dosing of water, perfume or even oils.
There are almost no limits to the use as a dosing pump in various industries. As a spinning pump it is only used for special applications.
Predominantly used in spinning and adhesives technology, they offer the possibility of realizing two flow rates with minimal space and one motor drive only.
Product bores which are on both sides of the pump body allow the pump to be integrated directly into the production line.
They can be used for all applications. Direct installation in the product line does not require an additional clamping block.
Discharge pumps ensure gentle discharge of polymer melts with low product shear. Booster pumps ensure a defined process pressure for downstream tools such as dies or extruders.
For highly accurate, low-pulsation dosing of liquids. The gear metering pumps achieve an efficient performance even at low viscosity and back pressure.
Paint metering pumps can also be used for robot applications. Even at short flushing cycles these pumps show excellent flushing results.
Solutions for material preparation, conditioning and supply to the meter mix dispense machine.
Lightweight design:
2C - 3C Meter Mix Dispense Machine for low flow rates
Our allrounder:
1C - 4C Meter Mix Dispense Machine for low to medium flow rates
Compact and efficient:
2C - 4C Meter Mix Dispense Machine with an output of up to 10 l/min
High-capacity:
2C - nC Meter Mix Dispense Machine for high material flow rates
Customised solutions:
perfectly tailored to suit your application
The mixing takes place exclusively through the flow movement of the components and the geometry of the mixing element.
The components are mixed by a rotating element in a mixing chamber.
The mixing takes place through the flow movement of the components in cooperation with the geometry and rotation of the mixing element.
MarCoat Gear Metering Pumps for Paint Application
With the MarCoat pump series, coatings and inks can be precisely metered. At the same time, MarCoat has very short cleaning cycles with the best purging results – regardless of whether color changes or final cleaning are involved. Due to different sizes and connection designs these pumps offer a wide range of mounting options for the whole paint industry. Also these pumps are best suitable for robot applications.
| Material | Material properties | Field of application | Permissible operating temperature max. | Permissible cleaning temperature max. | |
|---|---|---|---|---|---|
| N17 | high chromium alloyed stainless steel, additions of nickel, molybdenum and titanium |
| 300°C 570°F | 400°C 750°F | |
| N19 | high chromium alloyed stainless steel, additions of molybdenum and vanadium |
| 180°C 356°F | 200°C 392°F | |
| N31 | high chromium alloyed stainless steel, additions of molybdenum and vanadium Can be used in combination with Stellite S2. |
| 250°C 480°F | 300°C 570°F | |
| Stellite S2 | cobalt-based alloy with high chromium content and additions of tungsten and nickel Can be used in combination with N31. |
| 150°C depending on material combination | 300°C depending on material combination | |
| N33 | high chromium alloyed stainless steel, additions of nickel, molybdenum and manganese |
| 200°C 392°F | 220°C 428°F | |
The pump drive connection is available in following types:
plug type
Gear pump with motor
- Base plate with mounting block
- Coupling
- curved tooth coupling
- cardan shaft
- all-steel coupling
- magnetic coupling
- Motor
- asynchronous gear motor
- servo motor / servo gear motor
- synchronous gear motor
The drive units are designed according to the operating conditions.
Coating
Coating technologies take a significant key position in the development of new products. The various coating technologies enlarge the application possibilities of the base materials. Furthermore, a coating reduces friction, wear and corrosion. In principle, all named materials can be coated depending on the specification.
Diamond-Like Carbon (DLC) improves the properties:
- high surface hardness
- high wear protection
- smaller coefficient of friction
- better corrosion reduction to aggressive media
- higher chemical resistance / stability
- non-stick effect (reduced adhesion of polymers and other materials)
- high temperature firmness to 250°C
- excellent accuracy to size (no change of the high discharge accuracies)
- high economic efficiency through longer endurance and improvement of technological properties
- biocompatible, allows the use in the food industry and in the medical field
Sealing systems for the gear pumps
- stuffing box seal
- PTFE seal
- sealjet seal
- labyrinth seal
- mechanical seal
- magnetic coupling
ATEX Directive 2014/34/EU
A version according to the Atex directive is available for the pump as well as for the drive.
Heating or cooling for the gear pumps Heating or cooling can be provided electrically as well as by the thermal fluid.
Inquiry Specification
Gear Metering Pumps
Please fill out this form – with this data we will select the suitable gear pump.
Inquiry Specification
Drive Unit
Please fill out this form – with this data we will select the suitable drive for the pump.
The entire pump portfolio cannot be completely listed due to the large number of available designs. The same applies to the fields of application. Please contact us!
Do you have questions about our products?
Please contact us at +49 (0) 551-7073-100
